Product Description
3M Fire Barrier Sealant is a high-strength, single-component, moisture-curing, gap-filling polyurethane adhesive that creates high strength bonds on a wide variety of materials including plastics, metals, fiberglass and wood. 3M™ Polyurethane Adhesive Sealant 560 is a single-component, moisture-curing polyurethane sealant used to bond a wide variety of materials, including plastics, fiberglass reinforced plastic (FRP), sheet molding compound (SMC), aluminum, steel, coated metal and wood. It exhibits high tensile strength, good UV resistance, mid-range Shore A Hardness and high modulus in a wide variety of extreme service environments. Available in cartridge, sausage pack and drum volumes to meet your application needs.
Features & Benefits: Fire Barrier Water Tight Sealant 1000 NS
Our 3M™ Fire Barrier Water Tight Sealant 1000 NS is a non-slump, ready-to-use, single component, neutral cure, silicone sealant that cures upon exposure to atmospheric humidity to form a flexible firestop seal. Our water tight sealants help control the spread of fire, smoke and noxious gases before, during and after exposure to fire.
- Firestop tested up to 3 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
- Fire resistance tested for construction joint (including curtain wall) systems in accordance with ASTM E 1966 (UL 2079), ASTM E 2307
- Excellent caulk rate and sealant can be applied with conventional caulking equipment
- Non-slump, halogen-free formula provides strong adhesion
- Exceptional weatherability for durability during construction
- Minimizes noise transfer (STC-Rating of 56 when tested in STC 56-rated wall assembly)
- Formulated as a re-enterable and repairable solution
- Sealant is paintable with primer
Features & Benefits: Fire Barrier Water Tight Sealant 3000 WT
3M™ Fire Barrier Water Tight Sealant 3000 WT provides up to 4-hour fire protection in tested and listed systems. It is a gun-grade, intumescent, silicone, elastomeric sealant that cures upon exposure to the atmosphere to form a monolithic flexible firestop seal. Properly installed, this sealant helps control the spread of fire, smoke and noxious gasses before, during and after exposure to fire and exhibits good adhesion to a full range of construction substrates.
- Firestop tested up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S114
- High-solids formula produces limited shrinkage
- Continuous seal remains pliable and allows for typical pipe movement
- Re-enterable and repairable fire barrier sealant
- Offers excellent sealant and caulking properties
- Sealant helps minimize noise transfer
Features & Benefits: Fire Barrier Sealant CP 25WB+
Is a red, one-component, gun-grade, latex-based, intumescent firestop sealant. This fire barrier sealant helps control the spread of fire, smoke and noxious gases before, during and after exposure to a fire.
- Firestop tested for through penetration applications up to 4 hours in accordance with ASTM E814 (UL 1479) and CAN/ULC-S115
- Sag-resistant properties offer clean application as well as strong adhesion in both wall and floor applications
- Water-based and paintable sealant provides easy application and clean-up
- Sealant is re-enterable and repairable
- Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
- Sealant helps minimize sound transfer
Features & Benefits: Fire Barrier Sealant IC 15WB+
Is a yellow, one-part, gun-grade, intumescent firestop sealant that provides up to 3-hour fire protection in tested and listed systems. This helps prevent the spread of fire, smoke and noxious gas, while also acting as an acoustic barrier to help minimize noise transfer.
- Firestop tested for through penetration applications for up to 3 hours in accordance with ASTM E 814 (UL 1479) and CAN/ULC S115
- Sealant designed to help minimize sound transfer
- Water-based and paintable sealant provides easy application and clean-up
- Exceptional adhesion for long-term performance
- Applied with conventional caulking equipment with excellent caulk rate
- Sag-resistant properties offer clean application as well as strong adhesion
- Sealant is re-enterable and repairable
- Fire resistance tested for static construction joint systems in accordance with ASTM E 1966 (UL 2079)
Country of Origin: United States.
Application Instructions
Surface Preparation: Surfaces to be sealed or bonded should be clean and dry. Surfaces should be free from grease, mold release, oil, water/condensation, and other contaminants that may affect the adhesion of the sealant. Abrading with 180 to 220 grit abrasive followed by a solvent wipe will improve the bond strength. Suitable solvents include 3M™ Adhesive Remover or methyl ethyl ketone (MEK).
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
3M Fire Barrier Sealant
- Format: Cartridge
- Material: Polyurethane
- Compatible Material: Plastic , Metals , Fiberglass , Wood
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.