'Bondo 0026' is out of stock and not currently available for purchase on the site.

Product Description

Bondo Body Filler has been helping vehicle owners and auto body professionals for decades. This simple two-part solution includes a resin-based filler and a hardener. A tube of the hardener is included with Bondo Body Filler. The consistency of both compounds is creamy, but as the hardener is blended together with the filler it acts as a catalyst, creating a chemical reaction which cures the product. This fast-curing body filler spreads easily and will adhere to correctly prepared surfaces.

Bondo Body Filler shapes in minutes and will accept as many reasonably applied applications as required to fill holes and deep scratches or dents. It is formulated to be non-shrinking and permanently durable. Once it has completely hardened — normally in 25 minutes or less — Bondo Body Filler can be sanded using various grits to achieve as smooth a finish as required. In addition to its uses in repairs of typical vehicle surfaces, the filler is also suitable for repairing other surfaces including wood, steel, aluminum, fiberglass, and concrete. Bondo Body Filler products include directions that help you easily create just the right mix for your auto repair job and allow for same-day repairs.

Features & Benefits

  • All purpose solution for repairing dents, dings, and scratches in your home or on your car.
  • Interior or exterior use.
  • Multi-surface use on metal, aluminum, masonry, concrete, and more.
  • Easy-to-use filler mixes and spreads smoothly.
  • Non-shrinking formula is permanently durable.
  • Two-part formula chemically bonds with surface to adhere permanently.
  • Fast-curing formula is sandable in 20 minutes for same-day repairs.
  • Paintable formula is compatible with most paints and paint systems.
  • Bondo Blue Cream Hardener included.
  • Mixes light blue when hardener and filler are mixed thoroughly and ready to use.
  • Workable for 3-4 minutes once filler and hardener are mixed together.
  • Top coat of Bondo Glazing and Spot Putty is recommended to fill pin holes and small imperfections for a smooth finish.
  • Fill stage of 3M Body Repair System.
Country of Origin: United States.

Warning: This product can expose you to chemicals including , which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

Bondo Body Filler
  • Shelf Life: 12 months
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Buying GuideDownload Technical Bulletin

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Search  
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles