'DAP TBTS' has been discontinued.

Product Description

DAP Tank Bond Thread Stopper holds screws and bolts tightly in place so you can fix any loose screw. The fast-dry coating creates a tight seal that absorbs shock and vibrations preventing fasteners from unintentionally backing out of wood, metal, and plastic. Apply Thread Stopper to screw threads, let it dry, and install the screw. Using the non-locking formula, fasteners can be easily removed and replaced with manual tools up to five times without permanently bonding threads. In addition, the product coats the threaded bolt or screw with a gel-like coating to help absorb shock and vibration. Like a traditional thread locker, Thread Stopper can be used on metal, wood, plastic, and more, and it won't damage the plastic or crack it. Thread Stopper is a non-permanent solution ideal for routine maintenance repair or for tightening clamps on components that may need to be accessed or replaced in the future on everything from guitars to drawer pulls.

Features & Benefits

  • Works on multi-materials
  • Works on all fastener types & sizes
  • 30 minute cure time
  • Absorbs shock & vibrations
  • Non-locking formula
  • Won't damage plastic
  • Works on metal, wood, plastic & more
Country of Origin: United States.

 

Technical Information

DAP Tank Bond Thread Stopper
  • Adhesive: Clear   How are adhesives different?
  • Adhesive Base: Accelerator Hardener
  • Adhesive Base: Resin Epoxy Resin
  • Color: Orange
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Safety Data SheetDownload Technical Data Sheet

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Search  
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles