Gorilla Epoxy Syringe

Product Description

Gorilla Epoxy Syringe is an incredibly strong and durable household and automotive repairs adhesive with superior solvent and water resistance. The easy-to-use syringe keeps the epoxy resin and hardener separate, so it is easy to dispense. The two-part, gap-filling formula of the Gorilla Epoxy Syringe system easily bonds steel, aluminum, glass, wood, ceramic, tile, and most plastics. Plus, it dries in an ideal, clear finish that makes projects look spotless.

Gorilla Epoxy has 3300 psi bond strength and a 5-minute set-time for a quick strong application process. The adhesive is water resistance and suitable indoor and outdoor use on a wide variety of projects. The epoxy can be painted with latex paint and stained with a water-based stain and is sandable for a perfect finish.

Features and Benefits

• Clear dry formula is ideal for a clean and easy finish
• Plenty of repositioning time for the perfect fit
• Fill voids and bond uneven and vertical surfaces
• Once cured, the product is solvent resistant
• Easy-to-use syringe has separate barrels of epoxy resin and hardener keep epoxy from hardening
• Syringe dispenses evenly and includes a cap for multiple uses

Directions for Use

1. Prepare Your Work Area and the Surface - If you’re using Gorilla Epoxy for the first time or bonding a new type of material, we always recommend trying a test piece first. Prepare your work area - It is recommended to use Gorilla Epoxy in a well-ventilated area. Be sure your work area is protected from spills. Gather your mixing tray and stir sticks so that all your supplies are together. Prepare the surface - To improve adhesion, roughen smooth surfaces before gluing. Then clean and dry all surfaces to be bonded.
2. Mixing Gorilla Epoxy - Remove the black cap from the two syringes. With tip pointing upward, cut or snap the end from the tip of the syringes. With the tip still pointing upward, eliminate air and ensure even dispensing by slowly pushing the plunger until both the resin and the hardener are at the tip. Push the plunger to dispense even amounts of resin and hardener onto a clean, disposable, contained surface. The package itself can be used as a mixing tray. If you flip the plastic blister shell over, you can use the small well as a starter dish to begin dispensing until both the resin and hardener are flowing equally. Once the flow is even, move to the larger mixing well to dispense your even ratio. Mix the two parts for about 20 seconds, until the mixture is uniform. Apply within 5 minutes. As you mix, you will notice that the epoxy warms up. This is a reaction that occurs as the resin and hardener combine.
3. Application - After mixing is complete, apply Gorilla Epoxy within 5 minutes. The epoxy mixture will continue to thicken and the bond strength will decrease the longer you wait to apply.
4. Clamping - To reach maximum bond strength, clamp project together and leave undisturbed.

Important Cure Times and Storage

• Set: 5 minutes to apply and position
• Handling: Allow to cure for 30 minutes undisturbed (no weight or handling)
• Final Cure: Allow 24 hours for load-bearing weight
• Storage: To close, pull plunger slightly back. Wipe tip clean with a dry cloth and align the notch on tip and cap. Close tightly.