Gorilla Max Strength Clear Construction Adhesive
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
Product Description
Gorilla Max Strength Clear Construction Adhesive combines the strength and versatility you have come to expect from Gorilla with a crystal clear, easy to use, non-foaming formula. This low odor, easy-to-use adhesive dries crystal clear and is 100 percent waterproof. Bonds to virtually any surface including wood, drywall, concrete, paneling, trim & molding, ceramic, tile, and more.
Features & Benefits
- Gorilla's Strongest Construction Adhesive Formula.
- Dries Crystal Clear.
- Works Under Water – 100 percent Waterproof.
- Easy to Dispense.
- Meets ASTM C557, ASTM D3498 and AFG-01 Specifications.
- VOC Compliant.
- Low Odor.
- Non-Foaming Formula.
Country of Origin: United States.
Application Instructions
PLEASE NOTE: Heavy items may require temporary support. Use in conjunction with mechanical fasteners when hanging large mirrors.
Cartridge
- Unscrew and remove nozzle from top of cartridge.
- Set nozzle aside. Cut hard plastic tip of cartridge above the threads.
- Replace nozzle.
- All surfaces should be clean and free of dirt, grease and oil. Best if used above 40°F.
- Cut nozzle at 45° angle to desired bead size.
- Insert into cartridge gun.
- Apply adhesive to one surface in a zig-zag pattern or inside perimeter of the object. Be careful of squeeze-out. When working on rough, uneven surfaces, use enough adhesive to fill gaps.
- Within 10 minutes, press surfaces firmly together.
- Repositionable for 30 minutes.
Tube
- All surfaces should be clean and free of dirt, grease, oil and old adhesive. Best applied in temperatures between 10°C and 40°C in a well-ventilated area.
- Screw on nozzle and cut to desired bead size.
- Squeeze adhesive on to one surface in a zig-zag pattern. When working on uneven surfaces, use enough adhesive to fill gaps.
- Within 30 minutes, press surfaces together and hold for 30-60 seconds.
- Remove any excess adhesive immediately with a dry cloth. White spirit may be used according to manufacturer’s instructions.
- Fully cure within 24 hours.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
Gorilla Max Strength Clear Construction Adhesive
- Standards Met: Meets APA AFG-01, ASTM C557, and ASTM D3498 specifications.
- Service/Operating Temperature: -40°F to 212°F
- Application Temperature: 40°F (minimum)
- Application Temperature: Best above 40° F
- Outdoor: Yes
- Indoor: Yes
- Moisture Resistant: Waterproof
- Paintable: Yes, in 2 hours. Best with light brush stroke application.
- Sandable: Yes
- Stainable: No
- Foams When Cured: No
- Cured Color: Clear
- Storage Tips: Best if stored in a cool, dry location with the nozzle attached filled with adhesive. STORE AWAY FROM CHILDREN AND ANIMALS.
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
8212302 Standard sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
9 oz. cartridge | 8212302
UPC = 052427006943 | 12 | Single Item (1-11 Items) 1 - 4 Cases (12-59 Items) 5 - 9 Cases (60-119 Items) 10+ Cases (>= 120 Items) | $12.12 $11.52
a 5% discount $11.33
a 7% discount $11.14
a 8% discount | |
8212302 Special Order Sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
2.5 oz. tube Approximately 10 extra business days to ship | 105045
UPC = 052427009821 | 6 | Single Item (1-5 Items) 1 - 4 Cases (6, 12, 18, ... Items) 5 - 9 Cases (30, 36, 42, ... Items) 10+ Cases (60, 66, 72, ... Items) | 1 case minimum $8.60
a 7% discount $8.46
a 8% discount $8.32
a 10% discount | |
Please Read
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
- Special order sizes often ship direct from our supplier so will not arrive together with stocked products.
Special Order Minimums
- Minimum requirements apply because a size may be non-stock.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
Question & Answers
Required fields
Please enter a Question. Please enter your Name. Please enter your Email Address.
User Reviews
Required fields
Please choosea Score. Please enter a Title. Please enter the Review. Please enter your Name. Please enter your Email Address.
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).