Intertape Printed Reinforced Water-Activated Tape

Print Page
22 Reviews


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Natural with Red "STOP CAUTION" printing
  • Size
    3 in. x 450 ft. *70mm wide
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Intertape 233 "STOP-CAUTION" Printed Reinforced Water-Activated Tape is a 3-way fiberglass reinforced natural kraft carton sealing tape with water-activated adhesive and is recommended for use on cartons up to 20 pounds. This tape is printed "STOP-CAUTION" in red letters. IPG 233 water-activated reinforced tape is designed to provide consistent performance in carton sealing applications where durability, extra strength and reliability are required. The extra strong fiberglass yarns are bonded between the high tensile strength sheets for an extra margin of strength. Works well on recycled cartons and non-unitized loads.

Features & Benefits

  • Starch based adhesive aggressively bonds to corrugated cartons, even in dusty or dirty environments.
  • Not affected by extreme hot or cold temperatures.
  • Can not open a sealed carton without leaving a broken seal.
Country of Origin: United States.

 

Technical Information

Intertape Printed Reinforced Water-Activated Tape
  • Carrier/Backing: fiberglass yarns bonded between high tensile strength paper sheets
  • Adhesive: water-activated starch-based   How are adhesives different?
  • Thickness: 5.5 mils (carrier, adhesive)   What is mil thickness?
  • Tensile Strength: 66 pounds per inch (longitudinal) 26 pounds per inch (transverse)
  • Core: N/A
  • Paintable: Yes
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Product Data Sheet

233 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

3 in. x 450 ft.

Actual Size: 70mm wide

K2485P001

UPC = 309272515077
10

Single Item (1-9 Items)

1 - 4 Cases (10-49 Items)

5 - 9 Cases (50-99 Items)

10+ Cases (>= 100 Items)

$17.83

$14.91
a 16% discount

$14.67
a 18% discount

$14.42
a 19% discount

N/A

$149.10

$146.70

$144.20

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles