JVCC Double Sided Tape Dispenser (925DC)

Print Page
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Blue
  • Size
    For tape up to 2" wide
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

For double-coated tapes, when the adhesive is on both sides of the tape (AKA double-sided), you'll need a hand-held tape dispenser for the most efficient application. As you apply the tape, the dispenser rewinds the liner onto the take-up spool. The JVCC 925DC Double-Sided Tape Dispenser has a heavy formed steel frame for maximum durability and long life. With adjustable tension brakes on the tape roll holder and a scrap rewind spool, you'll have the best performance with rolls of any tape weight. A serrated blade is attached to the dispenser for easy cutting.

NOTE: The JVCC 925DC double-coated tape dispenser is not recommended for thick, hard to cut tapes like double-sided cloth and carpet tapes. It holds rolls up to 2 inches wide with a maximum diameter of 5-1/2 inches on a 3-inch diameter core. Country of Origin: United States.

Application Instructions

Take the tape's release liner around the rubber roller "before" the knife so it will not get cut. The tape goes over the knife up to the small roller on top, the liner bends around the larger roller, under the knife and back to the wind-up. You also have to adjust tensions on the unwind and wind up until it works correctly since every type of tape requires a different adjustment.

 

Technical Information

JVCC Double Sided Tape Dispenser (925DC)
  • Frame Construction: heavy formed steel
  • Blade: serrated
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

925DC Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

For tape up to 2" wide

Approximately 3 extra business days to ship
925DC-2

UPC = 688295158813
5

Single Item (1-4 Items)

1 Case (5 Items)

2 Cases (10 Items)

3+ Cases (15, 20, 25, ... Items)

$138.53

$123.05
a 11% discount

$122.00
a 12% discount

$120.96
a 13% discount

N/A

$615.25

$610.00

$604.80

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
BH
Brent H. May 23, 2017
QUESTION: Will 2 inch wide Scapa tape 4450 work with this dispenser?
ANSWER: JVCC’s 925DC dispenser can accept tape on a 3” diameter core up to a maximum outside diameter of 5.5 inches. Scapa 4450’s outside diameter for their 60 yard rolls is under 5 inches so should fit well.

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles