Office, DIY, Health, Sports, Crafting, School & Outdoors
Order online or call us to place an order.  +1 (908) 248-0427

JVCC Polyester Circuit Plating / Silicone Splicing Tape (PPT-25C)

Print Page
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Clear
  • Size
    Purchased Most Frequently: 3 in. x 72 yds. (Clear)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC PPT-25C Tape is a 1 mil polyester film coated with 1.5 mils of pre-cured silicone adhesive. It is designed to be fully stable electrically and mechanically at operating temperatures up to 350°F. The adhesive is cured to provide maximum resistance to chemicals and leaves no residue during masking or holding applications. Excellent resistance to abrasives, acids, oils, aging, staining, and water immersion. Used as outer wrap on coils, capacitors, motors, and transformers and for masking in electroplating, anodizing, and PC boards. It can also be used to splice silicone-coated paper and films.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

JVCC Polyester Circuit Plating / Silicone Splicing Tape (PPT-25C)
  • Carrier/Backing: polyester (PET) film
  • Adhesive: silicone   How are adhesives different?
  • Thickness: 2.5 mils (carrier, adhesive) 1.5 mils (adhesive) 1 mils (carrier)   What is mil thickness?
  • Adhesion: 27 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 25 pounds per inch (longitudinal)
  • Dielectric Breakdown: 6000 volts
  • Service/Operating Temperature: -100°F to 392°F
  • Elongation: 90%
  • Core: 3" diameter
  • Electrolytic corrosion factor: 1.10
  • Country of Origin: Taiwan, R.O.C.
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • TLC #CT929
  • Permacel P-904, Saint Gobain #M52
  • Specialty Tape #S945
  • Bondtec #289
  • Solar Plus #GTT235
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

PPT-25C Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

3/8 in. x 72 yds.

Actual Size: 9.5mm wide

PPT-25C/ 03872

UPC = 682821230417
16

Single Item (1-15 Items)

1 - 2 Cases (16-47 Items)

3 - 5 Cases (48-95 Items)

6+ Cases (>= 96 Items)

$5.98

$4.61
a 23% discount

$4.46
a 25% discount

$4.08
a 32% discount

N/A

$73.76

$71.36

$65.28

1/2 in. x 72 yds.

Actual Size: 12.7mm wide

PPT-25C/ 0572

UPC = 682821230424
12

Single Item (1-11 Items)

1 - 2 Cases (12-35 Items)

3 - 5 Cases (36-71 Items)

6+ Cases (>= 72 Items)

$7.19

$5.71
a 21% discount

$5.52
a 23% discount

$5.07
a 29% discount

N/A

$68.52

$66.24

$60.84

5/8 in. x 72 yds.

Actual Size: 15.9mm wide

PPT-25C/ 06372

UPC = 682821230431
10

Single Item (1-9 Items)

1 - 2 Cases (10-29 Items)

3 - 5 Cases (30-59 Items)

6+ Cases (>= 60 Items)

$8.42

$6.76
a 20% discount

$6.53
a 22% discount

$5.97
a 29% discount

N/A

$67.60

$65.30

$59.70

3/4 in. x 72 yds.

Actual Size: 19.0mm wide

PPT-25C/ 07572

UPC = 682821230448
8

Single Item (1-7 Items)

1 - 2 Cases (8-23 Items)

3 - 5 Cases (24-47 Items)

6+ Cases (>= 48 Items)

$9.66

$7.92
a 18% discount

$7.67
a 21% discount

$7.03
a 27% discount

N/A

$63.36

$61.36

$56.24

1 in. x 72 yds.

Actual Size: 25.4mm wide

PPT-25C/ 172

UPC = 682821230455
6

Single Item (1-5 Items)

1 - 2 Cases (6-17 Items)

3 - 5 Cases (18-35 Items)

6+ Cases (>= 36 Items)

$12.31

$10.32
a 16% discount

$9.97
a 19% discount

$9.13
a 26% discount

N/A

$61.92

$59.82

$54.78

1-1/2 in. x 72 yds.

Actual Size: 38.1mm wide

PPT-25C/ 1572

UPC = 682821230462
4

Single Item (1-3 Items)

1 - 2 Cases (4-11 Items)

3 - 5 Cases (12-23 Items)

6+ Cases (>= 24 Items)

$17.51

$15.01
a 14% discount

$14.52
a 17% discount

$13.29
a 24% discount

N/A

$60.04

$58.08

$53.16

2 in. x 72 yds.

Actual Size: 50.8mm wide

PPT-25C/ 272

UPC = 682821230479
3

Single Item (1-2 Items)

1 - 2 Cases (3-8 Items)

3 - 5 Cases (9-17 Items)

6+ Cases (>= 18 Items)

$22.61

$19.63
a 13% discount

$19.00
a 16% discount

$17.38
a 23% discount

N/A

$58.89

$57.00

$52.14

3 in. x 72 yds.

Actual Size: 76.2mm wide

PPT-25C/ 372

UPC = 682821230486
2

Single Item (1 Item)

1 - 2 Cases (2-5 Items)

3 - 5 Cases (6-11 Items)

6+ Cases (>= 12 Items)

$33.01

$29.03
a 12% discount

$28.08
a 15% discount

$25.70
a 22% discount

N/A

$58.06

$56.16

$51.40

PPT-25C Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/4 in. x 72 yds.

Actual Size: 6.3mm wide

Approximately 3 extra business days to ship
PPT-25C/ 02572

UPC = 682821230400
24

Single Item (1-23 Items)

1 - 2 Cases (24, 48 Items)

3 - 5 Cases (72, 96, 120 Items)

6+ Cases (144, 168, 192, ... Items)

1 case minimum

$3.52
a 26% discount

$3.39
a 29% discount

$3.11
a 35% discount

---

$84.48

$81.36

$74.64

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
M
Mick May 16, 2020
QUESTION: Can this be used to splice reel to reel tape together?
ANSWER: We really do not offer a tape made specifically for A/V splicing; however Scapa 571 (see https://www.findtape.com/p224/) is an extremely thin splicing tape which may work for you. You could also try a site that specializes in A/V products like http://www.markertek.com/; I believe they offer splice tabs made specifically for that purpose. I hope this helps. Thank you.

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
FM
Francesca M. Verified Buyer Feb 14, 2019
Excellent tape
JVCC PPT-25C Polyester Circuit Plating / Silicone Splicing Tape
We use this tape in our laboratory as we have found it has very high clarity, low autofluorescence, adheres to frozen tissue samples, is not too thick and is economical. FindTape carries the tape at an excellent price and shipped several rolls to us right away. (https://www.future-science.com/doi/full/10.2144/btn-2018-0021)
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles