JVCC Skived PTFE Film Tape [5 mil carrier] (PTFE-5)
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.
ITEMS ON BACKORDER: *** you can choose to be notified via text when items are back in stockThe following are expected in approximately 7 day(s):
Color/Size: GREY 1/4 in. x 36 yds.
Product Description
JVCC PTFE-5 Skived PTFE Film Tape is a 5 mil pure skived PTFE film tape with a high temperature silicone adhesive. It comes self-wound without a liner. Used in electrical applications such as harness/coil wraps & separators, transformers and slot liners where good insulation and heat resistance are required. Also used in mechanical applications such as heat sealing bars & jaws, labeling machine pressure pads, chute liners, anti-friction devices, bearings, forming dies, aircraft mold release & guide rails where high temperature, maximum slip, and lubricity are required. High elongation of PTFE-5 permits tight wrapping and conforms to sharp bends/irregular surfaces. Country of Origin: United States.
* Multiple cases may be shipped per package in order to minimize the charge for shipping.
Technical Information
JVCC Skived PTFE Film Tape (PTFE-5)
- Carrier/Backing: polytetrafluoroethylene (PTFE) film / pure skived
- Adhesive: silicone How are adhesives different?
- Thickness: 7.2 mils (carrier, adhesive) 5 mils (carrier) What is mil thickness?
- Adhesion: 30 ounces per inch (to stainless steel test panel)
- Tensile Strength: 15 pounds per inch (longitudinal)
- Dielectric Breakdown: 12000 volts
- Service/Operating Temperature: -100°F to 500°F
- Elongation: 200%
- Core: 3" diameter
- Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative to...
This product can be used as an alternative to the following products(s):
- 3M #5481
- Permacel #P421
- DeWal #204-5
- St. Gobain #2255-5
- Taconic #6115-05
- Lanmar #585-5
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
PTFE-5 Standard sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
1/4 in. x 36 yds.Actual Size: 6.3mm wide | PTFE-5/ 02536
UPC = 686162768622 | 48 | Single Item (1-23 Items) ½ Case (24-47 Items) 1 - 2 Cases (48-143 Items) 3+ Cases (>= 144 Items) | $27.72 $26.15
a 6% discount $25.16
a 9% discount $23.09
a 17% discount | |
1/2 in. x 36 yds.Actual Size: 12.7mm wide | PTFE-5/ 0536
UPC = 686162768639 | 24 | Single Item (1-11 Items) ½ Case (12-23 Items) 1 - 2 Cases (24-71 Items) 3+ Cases (>= 72 Items) | $52.97 $50.05
a 6% discount $48.47
a 8% discount $44.72
a 16% discount | |
1 in. x 36 yds.Actual Size: 25.4mm wide | PTFE-5/ 136
UPC = 695087749104 | 12 | Single Item (1-5 Items) ½ Case (6-11 Items) 1 - 2 Cases (12-35 Items) 3+ Cases (>= 36 Items) | $100.24 $94.71
a 6% discount $92.01
a 8% discount $89.00
a 11% discount | |
2 in. x 36 yds.Actual Size: 50.8mm wide | PTFE-5/ 236
UPC = 682821230318 | 6 | Single Item (1-2 Items) ½ Case (3-5 Items) 1 - 2 Cases (6-17 Items) 3+ Cases (>= 18 Items) | $194.74 $184.01
a 6% discount $179.09
a 8% discount $177.55
a 9% discount | |
PTFE-5 Special Order Sizes
| ITEM SIZE | ITEM # |
ITEMS PER CASE |
QUANTITY ORDERING |
PRICE PER ITEM |
PRICE PER CASE |
|---|
3/8 in. x 36 yds.Actual Size: 9.5mm wide Approximately 3 extra business days to ship | PTFE-5/ 03836 | 32 | Single Item (1-15 Items) ½ Case (16 Items) 1 - 2 Cases (32, 64 Items) 3+ Cases (96, 128, 160, ... Items) | ½ case minimum $38.14
a 6% discount $36.85
a 9% discount $33.65
a 17% discount | |
3/4 in. x 36 yds.Actual Size: 19.0mm wide Approximately 3 extra business days to ship | PTFE-5/ 07536 | 16 | Single Item (1-7 Items) ½ Case (8 Items) 1 - 2 Cases (16, 32 Items) 3+ Cases (48, 64, 80, ... Items) | ½ case minimum $72.40
a 6% discount $70.26
a 8% discount $66.87
a 13% discount | |
1-1/4 in. x 36 yds.Actual Size: 31.75mm wide Approximately 3 extra business days to ship | PTFE-5/ 12536 | 10 | Single Item (1-4 Items) ½ Case (5 Items) 1 - 2 Cases (10, 20 Items) 3+ Cases (30, 40, 50, ... Items) | ½ case minimum $118.31
a 6% discount $115.02
a 8% discount $111.27
a 11% discount | |
1-1/2 in. x 36 yds.Actual Size: 38.1mm wide Approximately 3 extra business days to ship | PTFE-5/ 1536 | 8 | Single Item (1-3 Items) ½ Case (4 Items) 1 - 2 Cases (8, 16 Items) 3+ Cases (24, 32, 40, ... Items) | ½ case minimum $139.34
a 6% discount $135.52
a 8% discount $133.27
a 10% discount | |
3 in. x 36 yds.Actual Size: 76.2mm wide Approximately 3 extra business days to ship | PTFE-5/ 336 | 4 | Single Item (1 Item) ½ Case (2 Items) 1 - 2 Cases (4, 8 Items) 3+ Cases (12, 16, 20, ... Items) | ½ case minimum $272.85
a 6% discount $265.69
a 8% discount $265.67
a 8% discount | |
Please Read
Special Order Policies
- Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
- Special order sizes often ship direct from our supplier so will not arrive together with stocked products.
Special Order Minimums
- Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
- Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).
Question & Answers
[ viewing questions 1 through 1 of 1 total ]
Required fields
Please enter a Question. Please enter your Name. Please enter your Email Address.
AH
Andy Hayes Sep 14, 2020
QUESTION: Can you ship to Australia & what would be the cost per Kg
ANSWER: Yes, we ship directly to Australia. If you add your desired items and quantities into your shopping cart you can then enter your destination postal code, select your destination country, and then click on the ‘Calculate’ shipping button to get the available shipping methods and costs associated with them also. For volume-breaks not shown on the web site (e.g. pallet-level quantities), we can custom quote also. Thank you.
User Reviews
[ viewing reviews 1 through 1 of 1 total ]
Required fields
Please choosea Score. Please enter a Title. Please enter the Review. Please enter your Name. Please enter your Email Address.
RB
RHONDA B. Verified Buyer May 04, 2017
its fine
JVCC PTFE-5 Skived PTFE Film Tape [5 mil carrier]
its fine
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).