JVCC Heavy Duty Corrosion Control Pipe Wrap Tape (PWT-20C)

Print Page


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Black
  • Size
    Purchased Most Frequently: 4 in. x 100 ft. (Black)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape provides resistance to water, sun, acids, oil, corrosive chemicals and alkalis. This 20-mil SPVC pipe wrap and surface protection tape protects conduit couplings and pipe joints for either overhead or direct buried applications. It is made to be wrapped around itself onto a pipe, and provides electrical protection. JVCC PWT-20C pipe wrap tape is resistant to abrasion, fungus, and it is flame retardant.

Product Applications

  • Pipe joints
  • Conduit couplings
  • Overhead applications
  • Direct buried applications
  • Electrical uses

FindTape is your best resource for the highest quality tapes and adhesives. We have a huge selection of electrical tape, duct tape, packaging and sealing tape, film and vinyl tape, gaffers tape, security tape and much more. We offer outstanding industry expertise and customer service.

Warning: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov/.

 

Technical Information

JVCC Heavy Duty Corrosion Control Pipe Wrap Tape (PWT-20C)
  • Carrier/Backing: soft polyvinyl chloride (SPVC) film
  • Adhesive: synthetic rubber   How are adhesives different?
  • Thickness: 20 mils (carrier, adhesive)   What is mil thickness?
  • Adhesion: 11 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 32 pounds per inch (longitudinal)
  • Dielectric Breakdown: 1000 volts
  • Service/Operating Temperature: 14°F to 176°F
  • Elongation: 360%
  • Core: 3" diameter neutral
  • Water absorption rate: 0.290 maximum (25°C, 24 hours)
  • Country of Origin: China
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • Permacel #P-320
  • Achem #PW20
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

PWT-20C Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

2 in. x 100 ft.

Actual Size: 50mm wide

PWT-20C/ 2100

UPC = 695087750025
24

Single Item (1-23 Items)

1 - 5 Cases (24-143 Items)

6 - 11 Cases (144-287 Items)

12+ Cases (>= 288 Items)

$18.13

$15.71
a 13% discount

$15.33
a 15% discount

$14.21
a 22% discount

N/A

$377.04

$367.92

$341.04

3 in. x 100 ft.

Actual Size: 75mm wide

PWT-20C/ 3100

UPC = 686162769094
16

Single Item (1-15 Items)

1 - 5 Cases (16-95 Items)

6 - 11 Cases (96-191 Items)

12+ Cases (>= 192 Items)

$27.53

$23.55
a 14% discount

$22.96
a 17% discount

$21.29
a 23% discount

N/A

$376.80

$367.36

$340.64

4 in. x 100 ft.

Actual Size: 100mm wide

PWT-20C/ 4100

UPC = 695087750032
12

Single Item (1-11 Items)

1 - 5 Cases (12-71 Items)

6 - 11 Cases (72-143 Items)

12+ Cases (>= 144 Items)

$34.59

$31.35
a 9% discount

$30.55
a 12% discount

$28.36
a 18% discount

N/A

$376.20

$366.60

$340.32

PWT-20C Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

3/4 in. x 100 ft.

Actual Size: 19mm wide

Approximately 3 extra business days to ship
PWT-20C/ 07510064

Single Item (1-63 Items)

1 - 5 Cases (64, 128, 192, ... Items)

6 - 11 Cases (384, 448, 512, ... Items)

12+ Cases (768, 832, 896, ... Items)

1 case minimum

$6.16
a 17% discount

$6.01
a 19% discount

$5.58
a 25% discount

---

$394.24

$384.64

$357.12

1 in. x 100 ft.

Actual Size: 25mm wide

Approximately 3 extra business days to ship
PWT-20C/ 110048

Single Item (1-47 Items)

1 - 5 Cases (48, 96, 144, ... Items)

6 - 11 Cases (288, 336, 384, ... Items)

12+ Cases (576, 624, 672, ... Items)

1 case minimum

$8.02
a 19% discount

$7.82
a 21% discount

$7.25
a 27% discount

---

$384.96

$375.36

$348.00

1-1/2 in. x 100 ft.

Actual Size: 38mm wide

Approximately 3 extra business days to ship
PWT-20C/ 1510032

Single Item (1-31 Items)

1 - 5 Cases (32, 64, 96, ... Items)

6 - 11 Cases (192, 224, 256, ... Items)

12+ Cases (384, 416, 448, ... Items)

1 case minimum

$11.96
a 9% discount

$11.67
a 12% discount

$10.84
a 18% discount

---

$382.72

$373.44

$346.88

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
CO
C O. Verified Buyer Sep 20, 2018
4 " x 100' PVC tape
JVCC PWT-20C Heavy Duty Corrosion Control Pipe Wrap Tape
Very nice product. As described and seemingly a bargain for the price. Quick shipping.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles