Office, DIY, Health, Sports, Crafting, School & Outdoors
JVCC UHMW Polyethylene Film Tape [15 mil carrier] (UHMW-PE-15)

JVCC UHMW Polyethylene Film Tape [15 mil carrier] (UHMW-PE-15)

Print Page
1 Question & Answers
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Natural / Translucent
  • Size
    Purchased Most Frequently: 6 in. x 18 yds. (Natural / Translucent)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

JVCC UHMW-PE-15 UHMW Polyethylene Film Tape is a 15 mil ultra-high molecular weight polyethylene film with an aggressive acrylic adhesive. Its high chemical and abrasion resistance and extremely low coefficient of friction makes this a versatile engineering material for many severe service applications. Materials slide freely over tape surface with no-slip/stick tendency. High impact strength and shock-absorbing properties. Outwears PTFE many times over and is a good replacement when high-temperature resistance is not a requirement. Applications include: rub strips on conveyors; bearings and sliding surfaces; chutes and hopper liners; dead plates; wear pads; guide rails; tool tables and fences; furniture and drawer slides/runners. UHMW polyethylene tape is used primarily in automotive and mechanical applications. Meets automotive specs: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M. Wound on either a blue film or white paper release liner. Country of Origin: United States.

* Multiple cases may be shipped per package in order to minimize the charge for shipping.

 

Technical Information

JVCC UHMW Polyethylene Film Tape (UHMW-PE-15)
  • Standards Met: Chrysler MS-CH612, Ford ESB-M3G123-B, GM 6419M
  • Carrier/Backing: UHMW (Ultra High Molecular Weight) polyethylene film
  • Adhesive: acrylic   How are adhesives different?
  • Release Liner: white paper
  • Thickness: 21.3 mils (carrier, adhesive, liner) 17.3 mils (carrier, adhesive) 2.3 mils (adhesive) 15 mils (carrier) 4 mils (liner)   What is mil thickness?
  • Adhesion: 50 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 60 pounds per inch (longitudinal)
  • Service/Operating Temperature: up to 300°F
  • Elongation: 300%
  • Core: 3" diameter
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.
Alternative To

Alternative to...

This product can be used as an alternative to the following products(s):

  • Dewal #423-15
  • St. Gobain #2302-15
  • Taconic #6311-15
PLEASE NOTE: "Alternative" to is NOT the same as equivalent to so please ensure the specifications listed are suitable for your application.
View related products we sell to this item.

UHMW-PE-15 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 5 ft. **5 ft. value length

Actual Size: 12.5mm wide

UHMW-PE-15/ 055

UPC = 685646492022		10

Single Item (1-9 Items)

1 Case (10-19 Items)

2 - 3 Cases (20-39 Items)

4+ Cases (>= 40 Items)

$4.38

$3.67
a 16% discount

$3.61
a 18% discount

$3.61
a 18% discount

N/A

$36.70

$36.10

$36.10

1/2 in. x 18 yds.

Actual Size: 12.5mm wide

UHMW-PE-15/ 0518

UPC = 852687896533		18

Single Item (1-17 Items)

1 Case (18-35 Items)

2 - 3 Cases (36-71 Items)

4+ Cases (>= 72 Items)

$20.42

$19.32
a 5% discount

$19.00
a 7% discount

$17.13
a 16% discount

N/A

$347.76

$342.00

$308.34

1 in. x 18 yds.

Actual Size: 25.0mm wide

UHMW-PE-15/ 118

UPC = 685646492572		9

Single Item (1-8 Items)

1 Case (9-17 Items)

2 - 3 Cases (18-35 Items)

4+ Cases (>= 36 Items)

$39.59

$38.03
a 4% discount

$37.39
a 6% discount

$33.67
a 15% discount

N/A

$342.27

$336.51

$303.03

UHMW-PE-15 Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

3/4 in. x 18 yds.

Actual Size: 19.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 0751812

Single Item (1-11 Items)

1 Case (12 Items)

2 - 3 Cases (24, 36 Items)

4+ Cases (48, 60, 72, ... Items)

$30.00 8 item minimum

$28.67
a 4% discount

$28.19
a 6% discount

$25.45
a 15% discount

N/A

$344.04

$338.28

$305.40

1-1/4 in. x 18 yds.

Actual Size: 31.75mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 125188

Single Item (1-7 Items)

1 Case (8 Items)

2 - 3 Cases (16, 24 Items)

4+ Cases (32, 40, 48, ... Items)

$48.49 5 item minimum

$46.70
a 4% discount

$45.93
a 5% discount

$42.14
a 13% discount

N/A

$373.60

$367.44

$337.12

1-1/2 in. x 18 yds.

Actual Size: 38.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 15186

Single Item (1-5 Items)

1 Case (6 Items)

2 - 3 Cases (12, 18 Items)

4+ Cases (24, 30, 36, ... Items)

$57.35 4 item minimum

$55.36
a 3% discount

$54.43
a 5% discount

$50.54
a 12% discount

N/A

$332.16

$326.58

$303.24

2 in. x 18 yds.

Actual Size: 50.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 2186

Single Item (1-5 Items)

1 Case (6 Items)

2 - 3 Cases (12, 18 Items)

4+ Cases (24, 30, 36, ... Items)

$74.72 ½ case minimum

$72.30
a 3% discount

$71.10
a 5% discount

$67.20
a 10% discount

N/A

$433.80

$426.60

$403.20

3 in. x 18 yds.

Actual Size: 75.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 3184

Single Item (1-3 Items)

1 Case (4 Items)

2 - 3 Cases (8, 12 Items)

4+ Cases (16, 20, 24, ... Items)

$109.72 ½ case minimum

$106.44
a 3% discount

$104.67
a 5% discount

$100.76
a 8% discount

N/A

$425.76

$418.68

$403.04

4 in. x 18 yds.

Actual Size: 100.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 4363

Single Item (1-2 Items)

1 Case (3 Items)

2 - 3 Cases (6, 9 Items)

4+ Cases (12, 15, 18, ... Items)

$144.30 2 item minimum

$140.18
a 3% discount

$137.85
a 4% discount

$133.95
a 7% discount

N/A

$420.54

$413.55

$401.85

6 in. x 18 yds.

Actual Size: 150.0mm wide

Approximately 3 extra business days to ship
UHMW-PE-15/ 6182

Single Item (1 Item)

1 Case (2 Items)

2 - 3 Cases (4, 6 Items)

4+ Cases (8, 10, 12, ... Items)

$218.84

$212.90
a 3% discount

$209.36
a 4% discount

$201.54
a 8% discount

N/A

$425.80

$418.72

$403.08

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

[ viewing questions 1 through 1 of 1 total ]
C
Customer Mar 02, 2018
QUESTION: My drawers fit very tight, will this tape flatten out?
ANSWER: No. This is a firm plastic tape. Try a sanding block to take a few millimetres off before applying the tape. I did it and it worked fine.

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
CT
Chester T. Verified Buyer Apr 05, 2018
great price. quick low cost
JVCC UHMW-PE-15 UHMW Polyethylene Film Tape [15 mil carrier]
great price. quick low cost shipping. product was just what was needed.
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles