Office, DIY, Health, Sports, Crafting, School & Outdoors
Order online or call us to place an order.  +1 (908) 248-0427

Ludlow Double-Sided Removable/Permanent Tape [Extended Liner] (M-Tak HI/LO)

Print Page


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Natural
  • Size
    Purchased Most Frequently: 1 in. x 433-1/3 yds. (Natural)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Ludlow M-Tak HI/LO Double-Sided Removable/Permanent Tape (Extended Liner) is a Mylar tape differentially coated with a synthetic rubber adhesive on both sides (AKA double-coated). The liner on the tape can be easily removed because it has a non-adhesive or dry finger-lift edge on each side of the tape (there is 1/8 inch of liner overhang on each side of the tape so a 3/4 inch wide roll would become 1/2 inch width of adhesive tape once the liner is removed). M-Tak HI/LO has a clear, lightweight adhesive for temporary bonding and repositioning on one side, and a permanent adhesive for long-term bonding on the other side. It's perfect for business forms, mailers and envelopes, signs, and posters, labels, and advertisements. Great for lightweight attachments where later removability from one surface is key. Its Mylar carrier gives it additional strength and support. The release liner is printed with the words "TO EXPOSE ADHESIVE REMOVE LINER" which makes it ideal when the tape is put on items being sent to end-users. Country of Origin: United States.

 

Technical Information

Ludlow Double-Sided Removable/Permanent Tape (M-Tak HI/LO)
  • Carrier/Backing: polyester (PET) film aka Mylar
  • Adhesive: synthetic rubber   How are adhesives different?
  • Release Liner: 42# siliconized paper w/ finger-lift edge
  • Thickness: 5.6 mils (carrier, adhesive, liner) 3 mils (carrier, adhesive) 2.6 mils (liner)   What is mil thickness?
  • Adhesion: 35 ounces per inch (exposed side) / 20 ounces per inch (liner side)
  • Service/Operating Temperature: -20°F to 160°F
  • Application Temperature: 40°F to 105°F
  • Core: 3" diameter
  • Shelf Life: 12 months
  • Vehicle: VAE Copolymer
  • Dry Time: 3 to 6 hours depending on temperature, relative humidity and depth of fill
  • Painting : Yes, takes either oil or latex-based paints
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Product Data Sheet

M-Tak HI/LO Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 1300 ft. [1/4 in. adhesive]

M-TAK HI/ LO/ 051300

UPC = 682821234361
10

Single Item (1-9 Items)

1 Case (10-19 Items)

2 Cases (20-29 Items)

3+ Cases (>= 30 Items)

$77.98

$66.85
a 14% discount

$65.72
a 16% discount

$64.61
a 17% discount

N/A

$668.50

$657.20

$646.10

3/4 in. x 1300 ft. [1/2 in. adhesive]

M-TAK HI/ LO/ 0751300

UPC = 682821234378
7

Single Item (1-6 Items)

1 Case (7-13 Items)

2 Cases (14-20 Items)

3+ Cases (>= 21 Items)

$116.00

$100.64
a 13% discount

$98.96
a 15% discount

$97.28
a 16% discount

N/A

$704.48

$692.72

$680.96

M-Tak HI/LO Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1 in. x 1300 ft. [3/4 in. adhesive]

Approximately 12 extra business days to ship
M-TAK HI/ LO/ 11300

UPC = 682821234385
5

Single Item (1-4 Items)

1 Case (5 Items)

2 Cases (10 Items)

3+ Cases (15, 20, 25, ... Items)

1 case minimum

$127.92
a 12% discount

$125.80
a 13% discount

$123.65
a 15% discount

---

$639.60

$629.00

$618.25

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles