Patco Flame Retardant Galley Tape (1800)

Print Page


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    Black
  • Size
    Purchased Most Frequently: 24 in. x 100 ft. (Black)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Patco 1800 Flame Retardant Galley Tape, aka 1800FR, is an aircraft corrosion inhibitor tape designed for water seal aerospace applications in main cabin wet areas (galleys, lavatories, & entryways). Features of Patco 1800FR include: tough, conformable and moisture resistant; permanent and flame retardant; allows wide width usage; helps prevent corrosion on floor structures; will not delaminate; meets FAR requirements; compatible with most sealants; fast application; and can be die-cut to various shapes. Country of Origin: United States.

Warning: This product can expose you to chemicals including Antimony oxide (Antimony trioxide), Di(2-ethylhexyl)phthalate (DEHP), which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov/.

If your order will not be for a full case and you require certificate of conformance documentation to ship with your order please see our policy at https://www.findtape.com/customer/help.aspx#p4 so that the proper request (and charge) can be made at the time the order is placed.

 

Technical Information

Patco Flame Retardant Galley Tape (1800)
  • Standards Met: FAR 25.853(a) Appendix F for Interior Aircraft Use; Fokker FK05-159 & FK05-160; Bombardier 91-25-1, 91-25-2, 91-25-3, 91-25-3, 91-25-4, 91-25-5, 9-2
  • Carrier/Backing: Polyvinyl Chloride (PVC) film
  • Adhesive: acrylic   How are adhesives different?
  • Release Liner: 53# coated Kraft paper
  • Thickness: 9.5 mils (carrier, adhesive) 8.5 mils (carrier)   What is mil thickness?
  • Adhesion: 50 ounces per inch (to stainless steel test panel)
  • Tensile Strength: 25 pounds per inch (longitudinal)
  • Service/Operating Temperature: -40°F to 200°F
  • Application Temperature: 50°F to 120°F
  • Elongation: 200%
  • Core: 3" diameter plastic
  • Puncture Resistance: 12 pounds
  • Abrasion/Wear Index: 34
  • Country of Origin: United States
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Product Data Sheet

1800 Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

2 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 210024

Single Item (1-23 Items)

1 - 2 Cases (24, 48 Items)

3 - 4 Cases (72, 96 Items)

5+ Cases (120, 144, 168, ... Items)

1 case minimum

$46.30
a 9% discount

$45.53
a 11% discount

$44.76
a 12% discount

---

$1111.20

$1092.72

$1074.24

3 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 310016

Single Item (1-15 Items)

1 - 2 Cases (16, 32 Items)

3 - 4 Cases (48, 64 Items)

5+ Cases (80, 96, 112, ... Items)

1 case minimum

$69.39
a 9% discount

$68.22
a 10% discount

$67.08
a 12% discount

---

$1110.24

$1091.52

$1073.28

4 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 410012

Single Item (1-11 Items)

1 - 2 Cases (12, 24 Items)

3 - 4 Cases (36, 48 Items)

5+ Cases (60, 72, 84, ... Items)

1 case minimum

$92.52
a 9% discount

$90.98
a 10% discount

$89.43
a 12% discount

---

$1110.24

$1091.76

$1073.16

6 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 61008

Single Item (1-7 Items)

1 - 2 Cases (8, 16 Items)

3 - 4 Cases (24, 32 Items)

5+ Cases (40, 48, 56, ... Items)

1 case minimum

$138.82
a 8% discount

$136.51
a 10% discount

$134.21
a 11% discount

---

$1110.56

$1092.08

$1073.68

18 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 181003

Single Item (1-2 Items)

1 - 2 Cases (3, 6 Items)

3 - 4 Cases (9, 12 Items)

5+ Cases (15, 18, 21, ... Items)

1 case minimum

$416.86
a 8% discount

$409.90
a 9% discount

$402.99
a 11% discount

---

$1250.58

$1229.70

$1208.97

19 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 191002

Single Item (1 Item)

1 - 2 Cases (2, 4 Items)

3 - 4 Cases (6, 8 Items)

5+ Cases (10, 12, 14, ... Items)

1 case minimum

$439.98
a 8% discount

$432.63
a 9% discount

$425.32
a 11% discount

---

$879.96

$865.26

$850.64

24 in. x 100 ft.

Approximately 15 extra business days to ship
1800/ 241002

Single Item (1 Item)

1 - 2 Cases (2, 4 Items)

3 - 4 Cases (6, 8 Items)

5+ Cases (10, 12, 14, ... Items)

1 case minimum

$555.95
a 8% discount

$546.68
a 9% discount

$537.43
a 11% discount

---

$1111.90

$1093.36

$1074.86

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock or if special setup is required to cut rolls to your desired custom width.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

[ viewing reviews 1 through 1 of 1 total ]
LB
Lyle B. Verified Buyer Jun 23, 2017
Nice tough tape
Patco 1800 Flame Retardant Galley Tape
I'm not actually using it on airplanes, but it is a nice tough tape. It has the sticking qualities and feel of quadruple thickness electrical tape
Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles