Office, DIY, Health, Sports, Crafting, School & Outdoors
Unasco White Standard Thread Seal Tape (ATW0)

Unasco White Standard Thread Seal Tape (ATW0)

Print Page


Ask a Question 
  • Quantity
    View "Full Pricing Table" below for details including case sizes and volume pricing.
  • Color
    White
  • Size
    Purchased Most Frequently: 1 in. x 36 yds. (White)
  • Price
    $ Price/photo will update once Color & Size chosen.
Before ordering, please read the "Product Description & Specs" tab content for more information about this item.

Product Description

Unasco White Standard Thread Seal Tape is a white PTFE tape used for sealing threaded parts on lines that carry liquids and gases. This tape works well with a broad variety of piping materials. With its higher than average density, it ensures that the tape will hold as the gases and liquids pass through the line. The tape is effective across a wide range of temperatures (-450°F - 500°F) and prevents galvanic corrosion of threads. It acts as a thread lubricant and anti-seize. Other benefits include no curing time, non-toxic, non-flammable, and has an unlimited shelf life.

Unasco Stainless Steel Thread Sealing Tape can be used on the following pipes made from:

  • Galvanized Steel
  • Iron
  • Brass
  • Copper
  • Aluminum
  • Fiberglass
  • Stainless Steel
  • Polyethylene
  • Polypropylene
  • PVC
  • CPVC
  • ABS

Application Instructions

For fittings up to 1-1/2 inch / 38mm diameter

  1. Use 1/2 inch / 12mm wide tape.
  2. Clean the male and female threads thoroughly.
  3. Wrap the tape around the male thread. Take care to keep the tape under tension as you are wrapping so the tape moulds itself into the root of the thread.
  4. Make sure that you wrap with the thread.
  5. Make sure that the tape does not overlap the end of the fitting.
  6. Three wraps seal most threads.

Note. For poor quality or damaged threads or threads that are hard to seal like parallel threads or threads on fittings subject to vibration, more than four wraps may be necessary.

 

Technical Information

Unasco White Standard Thread Seal Tape (ATW0)
  • Carrier/Backing: 100% Teflon PTFE
  • Adhesive: N/A
  • Service/Operating Temperature: -450°F to 500°F
  • Elongation: 100%
  • Density (standard): 0.8 gm/cm3
  • Country of Origin: Australia
Note: Specifications are those given by manufacturers and are not tested for accuracy.

Download Datasheets

The following downloads are available for this product:

Download Technical Data Sheet

ATW0 Standard sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 520 in. / 5-pack *Deal of the Day

ATW013-5-D

UPC = 643781386880		50

Single Item (1-49 Items)

1 - 4 Cases (50-249 Items)

5 - 9 Cases (250-499 Items)

10+ Cases (>= 500 Items)

$2.29 $5.99

$2.29 $5.99

$2.29 $5.99

$2.29 $5.99

N/A

$114.50 $299.50

$114.50 $299.50

$114.50 $299.50

3/4 in. x 520 in. / 5-pack *Deal of the Day

ATW022-5-D

UPC = 643781293928		30

Single Item (1-29 Items)

1 - 4 Cases (30-149 Items)

5 - 9 Cases (150-299 Items)

10+ Cases (>= 300 Items)

$3.88 $6.99

$3.88 $6.99

$3.88 $6.99

$3.88 $6.99

N/A

$116.40 $209.70

$116.40 $209.70

$116.40 $209.70

ATW0 Special Order Sizes

ITEM SIZEITEM # ITEMS PER CASE QUANTITY ORDERING PRICE PER ITEM PRICE PER CASE

1/2 in. x 260 in.

Approximately 10 extra business days to ship
ATW011250

Single Item (1-249 Items)

1 - 4 Cases (250, 500, 750, ... Items)

5 - 9 Cases (1250, 1500, 1750, ... Items)

10+ Cases (2500, 2750, 3000, ... Items)

1 case minimum

$0.43
a 56% discount

$0.36
a 63% discount

$0.34
a 65% discount

---

$107.50

$90.00

$85.00

1/2 in. x 1296 in.

Approximately 10 extra business days to ship
ATW015130

Single Item (1-129 Items)

1 - 4 Cases (130, 260, 390, ... Items)

5 - 9 Cases (650, 780, 910, ... Items)

10+ Cases (1300, 1430, 1560, ... Items)

1 case minimum

$1.40
a 27% discount

$1.39
a 27% discount

$1.38
a 28% discount

---

$182.00

$180.70

$179.40

3/4 in. x 260 in.

Approximately 10 extra business days to ship
ATW020150

Single Item (1-149 Items)

1 - 4 Cases (150, 300, 450, ... Items)

5 - 9 Cases (750, 900, 1050, ... Items)

10+ Cases (1500, 1650, 1800, ... Items)

1 case minimum

$0.61
a 47% discount

$0.54
a 53% discount

$0.52
a 55% discount

---

$91.50

$81.00

$78.00

3/4 in. x 1296 in.

Approximately 10 extra business days to ship
ATW024112

Single Item (1-111 Items)

1 - 4 Cases (112, 224, 336, ... Items)

5 - 9 Cases (560, 672, 784, ... Items)

10+ Cases (1120, 1232, 1344, ... Items)

1 case minimum

$2.18
a 16% discount

$2.16
a 16% discount

$2.14
a 17% discount

---

$244.16

$241.92

$239.68

1 in. x 260 in.

Approximately 10 extra business days to ship
ATW030150

Single Item (1-149 Items)

1 - 4 Cases (150, 300, 450, ... Items)

5 - 9 Cases (750, 900, 1050, ... Items)

10+ Cases (1500, 1650, 1800, ... Items)

1 case minimum

$0.78
a 41% discount

$0.72
a 46% discount

$0.72
a 46% discount

---

$117.00

$108.00

$108.00

1 in. x 520 in.

Approximately 10 extra business days to ship
ATW031150

Single Item (1-149 Items)

1 - 4 Cases (150, 300, 450, ... Items)

5 - 9 Cases (750, 900, 1050, ... Items)

10+ Cases (1500, 1650, 1800, ... Items)

1 case minimum

$1.06
a 34% discount

$1.05
a 35% discount

$1.04
a 35% discount

---

$159.00

$157.50

$156.00

1 in. x 1296 in.

Approximately 10 extra business days to ship
ATW03484

Single Item (1-83 Items)

1 - 4 Cases (84, 168, 252, ... Items)

5 - 9 Cases (420, 504, 588, ... Items)

10+ Cases (840, 924, 1008, ... Items)

1 case minimum

$2.91
a 9% discount

$2.89
a 10% discount

$2.86
a 11% discount

---

$244.44

$242.76

$240.24

   Please Read

Special Order Policies

  • Special orders are non-returnable (and non-cancelable if materials have been already ordered or cut before the cancellation request was received).
  • Special order sizes often ship direct from our supplier so will not arrive together with stocked products.

Special Order Minimums

  • Minimum requirements apply because a size may be non-stock.
  • Minimum Quantities: If a particular size has a minimum item requirement, please only order that size in multiples of that minimum (e.g. if the minimum is 12, then use multiples like 12, 24, 36, etc).

Question & Answers

User Reviews

Made in the USA
hot melt rubber (synthetic)
Offers the widest range of application flexibility available. Exhibits excellent processing performance whether manually or automatically applied. Has superior tensile strength, adhesion properties and holding force which ensures consistent, reliable seals. Hot melt adhesive will bond faster to a surface which is referred to as quick-grab or quick-stick. It typically has higher tack (will feel stickier to the touch), but is also softer. It has lower heat resistance, shear resistance, and sometimes UV resistance than an acrylic adhesive. NOTE: it is called hot melt because the adhesive is applied hot by the manufacturer and then hardens as it cools (you do not need to apply heat to the tape yourself).
natural rubber
Properties are similar to that of hot melt rubber, but natural rubber often holds where other adhesives won't (recycled fibers, dust, cold, heat and heavy loads). It provides good overall adhesion and moisture resistance.
acrylic
Offer excellent performance, especially for applications in temperatures less than 40°F and greater then 120°F. It provides excellent clarity, has high shear strength, is usually more permanent/durable even when exposed to moisture, and it ages well over extended periods in fluorescent and sunlight. Since it remains clear for the life of the application and does not yellow over time it is ideal for applications such as sealing white cartons. While it has good initial adhesion it does take 24-48 hours to cure and to achieve its maximum bond strength (has gradual adhesion buildup). Another difference between hot melt rubber and acrylic adhesive is if you fold tape over making the two adhesive sides touch the acrylic adhesive will remain attached to the carrier (e.g. paper, film) while a hot melt adhesive will stick to itself and pull off of the carrier. It is the best choice for clarity, UV resistance and aging characteristics.
silicone
Is great for extreme temperature applications since silicone adhesive can work in continuous operating temperatures from -100°F to 500°F. They also exhibit good chemical resistance, retain electrical properties, and remove cleanly with little or no residue.
zinc oxide
Zinc oxide based adhesive formula is a skin-friendly adhesive which is commonly used on sports medicine tapes.
Thickness, AKA caliper or gauge, refers to the distance from one surface of a tape backing, or adhesive, to the other.
1 mil = 1/1000 of an inch
Examples: 1/16 inch = 62.5 mils; 1/32 inch = 31.25 mils
The cut level indicates how many grams of cutting load a glove can withstand from a sharp blade before being penetrated.
Lower gauge gloves are heavier - have thicker construction, fewer stiches knitted per inch and offer less dexterity.
Higher gauge gloves are lighter - have thinner/finer construction, more stitches knitted per inch and offer more dexterity.
Gloves offered typically runs from 7 to 18 (12 and 13 are in the middle of the scale).
Shopping Cart Summary
VIEW CART - or - PROCEED TO CHECKOUT
Continue Shopping
Continue Shopping
EMAIL/SMS SIGN-UP
 +1
Adhesive Tape Blog
Video Resource Library
How-To Resource Articles